We all know that the iPhone 4 LCD Screen is easy to cratches and shatter. And we will be so sad that the phone is not beautiful as before. However, the phone is in perfect working. Why not replace the front screen by yourself? It is cheap and easy.
You can replace your phone front screen by yourself by folloing the steps below.
Step 1 Opening Accessoires iphone
1) Take out two bottom screws (blue arrows)
2) Use suction cup ( place it around the home button) and flip the glass up
3) You will see connectors and numbers. Use the prying tool and lift the number one and number two connector. For the number three connector lift the flap and pull the screen away. ( Red arrows)
Step 2 Removing OLD LCD
1) You will have to unstick your old one from the aluminum tray
2) Remove old front glass reflective material (its like a mirror) and clean off the old adhesive
3) Test fit your new screen ( it lines up with two small plastic nibs and two holes on the tray)
4) Remove the rear plastic and stick it on the tray ( you have to do this right the first step !)
5) When you are done use the old one as you template, and make small folds in the cable connector ( you need it to be folded identically)
Step 3 Replacing front glass
I didn't take pictures because, well its a pretty simple thing procedure, that is very difficult to do correctly. It's like removing the aluminum foil from a Hershey's bar. It's easy to do, but in the process the aluminum foil gets a bit wrinkled
1) Heat up the Glass and Plastic frame ( I can't really say how long depending on what you use, but a good sign is if you start to smell a little bit of plastic, that's a good signt
2) Someohow, either using your fingers or a prying tool, remove the glass/touchscreen from the frame. This will probably crack the lcd, and actually that makes it a bit easier. I heard from a friend, that if you already have a cracked glass, removing it is a bit easier than trying to remove it as an entire piece.
3) Clean off all the old residue, and if you bent your frame alittle, bend it back in to shape.
4) Apply the new adhesive strips ( pretty easy ) make sure that you when you buy the touchscreen/glass it comes with two new strips
5) Before you apply the touchscreen/glass put on some latex gloves ( from now until you are finish) and peel the inside screen protector away a bit, and tape down the cables
6)Remove the adhesive from the two strips and place the new glass on your plastic frame (take your time )
Step 4 Put New iPhone 4 LCD Screen replacement back in
7) Remove the inside screen protector of the Glass/touchscreen and put it glass side up ( to avoid dust). Then remove the screen protector and keep it in your hand ( you want to avoid getting any dust on it ). Before you snap the new LCD into the frame, make sure there in no dust/lint on either part ( used the compressed air before you put everything together, Do not use the microfiber since they have lint)
Step 5 Put everything back together
Just the reverse, pretty easy. Before you put the screws on the tray, make sure you didn't get any dust, if you did unsnap the lcd, used the compressed air to get it clean and put it back together. The only tricky connector is the #3 one, but its not too hard. Then you when you put the glass back into your iPhone, slide the top part first ( by the headset) and then the bottom part) and you are done !
we love how clear the glass is, but I hate how easy it gets scratched. You had better put on a screen protector without having to clean the glass, right after you take off the front plastic film.
没有评论:
发表评论